WITA HE OEM 2 40 Series, Translation Of The Original Operating Instruction

Page: 28 / 64

Translation of the original operating instructions
WITA HE OEM 2 | 40-XX | 60-XX
2.9 Inadmissible operating modes
If the pump is disconnected from the power supply, wait at
least 1 minute before switching it on again. Otherwise, the
pump's inrush current limit has no effect, which can lead to
functional errors or damage to any connected heating
controller. The pump's operational safety can only be
ensured, if it is used as intended. Point 4 ot these
operating instructions must be observed. Ensure
compliance with the limit values detailed in the
technical data.
3 Transport and storage
After receiving the product, inspect it immediately for damage caused in transport.
If any transport damage is found, this must be claimed by the carrier.
Improper transport and storage can lead to personal injuries
or damages to the product.
• Protect the product against frost, moisture and damage during transport
and storage.
• Only carry the pump by the pump housing, and never by the connection cable
or terminal box.
• If the packaging has been softened by moisture, the pump may fall out and
cause severe injuries.
4 Intended use
The HE OEM 2 efficiency pumps are designed for circulating hot water in central
heating systems and are aslo suitable for pumpeing low-viscosity media in the
industrial and commercial sector. They also can be used in solar technology
systems.
28