4/16
ProphyCair & Pro
Version: 01
ENGLISH
Warning Notices
Warning words are used in this manual and signify hazards
and unsafe practices which could result in personal injury
or property damage. See the definitions below for informa
-
tion relating to each word.
NOTE / IMPORTANT
Indicates a hazardous situation that could result in damage
to property if it is not avoided.
DANGER
Danger indicates an imminently hazardous situation,
which, if not avoided, will result in serious injury or death.
CAUTION
Caution indicates a potentially hazardous situation which, if
not avoided, may result in property damage or minor injury
or both.
WARNING
Warning indicates an imminently hazardous situation
which, if not avoided, will result in serious injury or death.
RISK OF ELECTRICAL SHOCK
Do not remove control unit cover.
EXPLOSION HAZARD
Do not use the control unit in the presence of flammable
anesthetics or in the proximity of an oxygen tent.
There is no known risk of adverse effects on the LINET
control unit/pump caused by other electromagnetic devi-
ces, present at the time of treatment, or vice-versa.
Refer servicing to qualified service personnel.
Never drop or insert objects into any opening of
the control unit.
DO NOT SMOKE while using this product and
do not use in the presence of smoking materials
or open flame. Smoking by visitors in the room
will contaminate the system. Therefore, visitor
smoking is NOT permitted. Air flowing through
air mattress will support combustion. Failure to
observe this warning can result in severe fire,
property damage and cause injury or death.
Entrapment may occur. Patient entrapment with
bed side rails and mattress may cause injury or
death. Mattress MUST fit bed frame and side rails
snugly to prevent patient entrapment. Follow the
manufacturer’s instructions and monitor patient
frequently. Proper patient assessment and monito-
ring, and proper maintenance and use of equip-
ment is required to reduce the risk of entrapment.
Variations in bed rail dimensions, and mattress
thickness, size, or density could increase the risk
of entrapment. Refer to the owner’s manual for
beds and rails for additional product and safety
information. Mattress MUST fit bed frame and bed
rails snugly to reduce the risk of entrapment.
To avoid risk of electric shock, this equipment must
only be connected to a supply main with a protecti-
ve earth using the power cord provided with the
product.
Do not heat, steam autoclave, immerse the control
unit in liquids or spill liquids or food on or into the
control unit. In the event of any spillage, imme-
diately turn off the control unit and disconnect it
from the power source. Return the control unit for
servicing to a Linet authorised service centre.
Care should be taken such that the power cord of
the control unit is not pinched and does not have
any objects placed upon it. Make certain the unit
and power cord is not located where it can be
stepped on or tripped over.
Do not modify this equipment without authorisation
from the manufacturer.
Not for use in oxygen-rich environments.
Before opening or cleaning the control unit enclo-
sure, make certain that the unit is turned off and
unplugged from its power source. The control unit
enclosure should only be opened by factory autho-
rized qualified technical service personnel.
Please read this manual before operating any of
LINET’s Air Therapy systems. If you are unable to
understand the manual, please contact your dealer
or the manufacturer before attempting to use this
equipment. Otherwise personal injury or property
damage may result.
When installing the LINET mattress system, do
not exceed the manufacturers rated weight for the
mattress or the bed frame. See the bed frame ma-
nufacturer’s manual for bed frame weight rating.
FCC Statements:
This device complies with FCC part 15.231 for license
exempt radio apparatus. Operation is subject to the fo-
llowing two conditions:
This device may not cause harmful interference,
and
This device must accept harmful interference
received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
