- 40 -
BerRate
<1.0 e-4
The BER is an indication of the number of transmission
errors and thus of the signal quality.
<1.0 e-4 = very low numbers of errors
1.0 e-3 = low number of errors
1.0 e-2 = threshold for display:
Signal?
bad signal
14.46 Mb = Input data rate
In-Freq
146-858 MHz
Selection of input frequency,
0.25 MHz steps
In-Offs
Input offset
-166 kHz, 0, +166 kHz
@
8 MHz
-125 kHz, 0, +125 kHz
@
7 MHz
In-BW
Bandwidth 7 / 8 MHz
HierMod
Hierarch mode
(available from "ModVers: H2.000)
high
(Priority)
low
(Priority)
In-ATT
0 dB, 20 dB
input attenuator
(available from "ModVers: H2.000)
DVB-T frontend module settings
GB
Channel overload, insert
selective channel filter
into RF input signal
BerRate
<1.0 e-4
The BER is an indication of the number of transmission
errors and thus of the signal quality.
<1.0 e-4 = very low numbers of errors
1.0 e-3 = low number of errors
1.0 e-2 = threshold for display:
Signal?
bad signal
38.15 Mb = Input data rate
In-Freq
50-862 MHz
Selection of input frequency,
0.5 MHz steps
SymRate
1750-7125 kSps
input
symbol rate
In-ATT
0 dB, 20 dB
input attenuator
In-Mode
16, 32, 64, 128, 256 QAM
DVB-C frontend module settings
Settings DVB-T
(Key code 4XXX)
Settings DVB-C
(Key code 5XXX)
