- 27 -
OV75M A/B=channel
1237MHz= input frequency A/B
479.00=output frequency A/B,
<1.0e-4=BER, alternating display
Channel
OV75M
V1.00
busy
Input channel
A/B
Mode*
Remux,
Remultiplexer mode
NonHier
, NonHierarchical mode
Hier
, Hierarchical mode
DVBTRep,
Repeater mode (available with DVB-T modul)
OV75M A
V1.00
busy
Please set all parameters of the frontend module settings
F-Out*
45-862 MHz,
0.25-MHz steps
loop
=
Loop thru mode ,
single
= single output
auto/on
: auto:COFDMCarrier signal switches off.
On: signal doesn't switch off.
Out-Att*
0-16 dB
output level, 1-dB steps
OutConf*
Out-BW*
COFDMCa*
COFDMSp*
normal / inverse
COFDMSpectrum
Modules*
Mod-No*
Displaying module number
0-9
Version*
Overflow counter shows the account of "overflows".
Counter reset: press simultaneously
ModVers
Program
Displays the list of transponder name. Select program with
. A
*
confirms the selection . Select programme per
channel.
Indication of
!Overfl
.shows: (total data rate to high)
T=TV; R=R
adio; = encrypted
MUXStat
Sum of selected programmes ch A/B
MUX on
- displaying status of Remux
QAMMode*
16 QAM, 64 QAM, QPSK
type of modulation
A:AV-MPEG
- module - displaying modules
B:AV-MPEG
- module - displaying modules
basic unit version,
software version module
undocumented command
Overflow counter
Version
V 1.00
1109012
00...99
Displaying: hard and software version of input modules
A: AV-MPEG
- module
S1.0003
- software version
H1.0000
- hardware version
5, 6, 7, 8 MHz
=
output bandwidth
Coderat
1/2, 2/3, 3/4, 5/6, 7/8
Code rate
k-Mode*
2k, 8k
k mode
Guardin*
1/4, 1/8, 1/16, 1/32
Guard intervall
NIT-Ins
On, off
Network Information Table insertion
NetName
network name
7 digits
off or set HEX code
0 x 0000 Network identifier
F F F F
OrgTsId
NetwId
off or set HEX code
0 x 0000 Transport Stream Identifier
F F F F
TsId
off or set HEX code
0 x 0000 Original Transport Stream
F F F F Identifier
A
Output settings
B
