- 32 -
Setting COFDM
DVB-T-Repeater mode
(Key code 4041)
OV75M A/B=channel
476 MHz= input frequency A/B
479.00=output frequency A/B,
<1.0e-4=BER, alternating display
OV75M
V1.00
busy
Mode*
DVBTRep,
Repeater mode (available with DVB-T
module). Input parameters are passed on to
COFDM
Remux,
Remultiplexer mode
NonHier
, NonHierarchical mode
Hier
, Hierarchical mode
OV75M A
V1.00
busy
Please set all parameters of the DVB-T frontend module
F-Out
45-862 MHz,
0.25-MHz steps
loop
=
Loop thru mode,
single
= single output
auto/on
: auto:COFDMCarrier signal switches off.
On: signal doesn't switch off.
Out-Att
0-16 dB
output level, 1-dB steps
OutConf
COFDMCa
COFDMSp
normal / inverse
COFDMSpectrum
Modules
Mod-No
Displaying module number
0-9
Version
Overflow counter shows the account of "overflows".
Counter reset: press simultaneously
ModVers
MUXStat
Sum of selected programmes
MUX on
- displaying status of Remux
A:DVBT
- module - displaying modules
basic unit version,
software version module
undocumented command
Overflow counter
Version
V 1.00
1109012
00...99
Displaying: hard and software version of input modules
A: DVBT
- module
S1.0003
- software version
H1.0000
- hardware version
Output settings
GB
You require this mode when
only one DVB-T front-end mo-
dule is plugged in. In this mode
input parameters as e.g. BW
and all other parameters are co-
pied to the output. Advantage:
You have to set only the output
frequency/attenuation parame-
ters.
