O p e r a t i n g I n s t r u c t i o n s
OKTOPUS
®
GLASS-Jack
GL-CC 1200
Technical Documentation
BA 000 257
Page 18 of 28
The used lithium-ion battery is unsusceptible to charging cycles that are too long. The lithi-
um-ion battery also does not have to be fully discharged before being recharged. In order to
prevent deep discharge of the battery it should at least be charged once every two month.
3.4 Coupling the OKTOPUS
®
to the crane boom
In order to be able to couple the OKTOPUS
®
GLASS-Jack GL-CC 1200 to the crane boom,
you need an “Adapter crane boom”. The Wirth Service team will be happy to advise you.
Fig. 10:
Coupling the OKTOPUS
®
to the head of the crane boom
Couple the OKTOPUS
®
to the crane hook as follows:
•
Mount the “Adapter crane boom” using the screws M16, washers and locknuts included in
the delivery.
•
Attach the OKTOPUS
®
to the head of the crane boom using the two locking bolts with
lynch pin included in the delivery (s. fig. 10).
Make sure that after performing adjustment works all screws M16 are firmly
tightened and that the locking bolt is secured with the lynch pin provided
by the manufacturer!
When coupling crane/OKTOPUS
®
, make sure that both, crane and OK-
TOPUS
®
, are shut down!
Locking bolt with
lynch pin
Crane boom
OKTOPUS
®
Adapter Crane boom
(6x Hexagon screws M16,
12x washers, 6x locknuts)
