O p e r a t i n g I n s t r u c t i o n s
OKTOPUS
®
GLASS-Jack
GL-CC 1200
Technical Documentation
BA 000 257
Page 28 of 28
5
Handling incidents
Incidents are indicated by the red warning light and the sound of the alarm buzzer. A fading
sound of the alarm buzzer signals total breakdown of electrical power supply.
Fig. 17:
Warning devices
When the alarm buzzer sounds and/or the red warning light flashes immediately leave the
hazard zone, since the suctioned element might suddenly drop Locate and rectify the cause
for the alarm. If you cannot remedy the fault, stop operating the OKTOPUS
®
immediately. Af-
ter releasing a possibly sucked element the OKTOPUS
®
has to be secured against further
use.
In case of faults that cannot be remedied, working with the OKTOPUS
®
shall be stopped immediately. The OKTOPUS
®
has to be secured against
further use.
If the red LED on the charge indicator is illuminated when turning the OKTOPUS
®
on, the
timer for shutoff is activated. This avoids inducing impermissible short working cycles by turn-
ing the device on and off. The built-in battery pack has to be charged.
If the display of the charge indicator is not illuminated when turning the OKTOPUS
®
on
please contact the Wirth GmbH Service Team immediately.
6
Disposal and recycling
For packaging the OKTOPUS
®
materials like wood, cardboard, paper and film are used.
These materials shall be recycled according to national regulations.
To dispose the OKTOPUS
®
hand it over to a waste management company. If you have any
question, please do not hesitate to contact Wirth GmbH.
For environmental reasons, hand over the OKTOPUS
®
for disposal to a
waste management company being fully aware and observing the respec-
tive national regulations!
