Operating Instructions
OKTOPUS
GL-K800
Technical documentation
1 19 900 002 a
Page 25 of 25
5.
Conduct in the event of faults
In the event of faults the acoustic alarm sounds and the warning light lights up. The total fail-
ure of the electric power supply is signaled by a down going sound of the alarm horn.
Fig. 17:
Alarm devices
In case the alarm horn is sounded and/or the red warning light lights up, leave the danger
area since the elements drawn could fall down suddenly. Find and remove the cause for the
alarm. In case the defects cannot be removed, finish working with the OKTOPUS
®
immedi-
ately. After any elements which might be drawn have been detached, the OKTOPUS
®
has to
be secured against further use.
If the fault cannot be remedied, stop work with the OKTOPUS
®
immedi-
ately. After releasing any suctioned elements secure the OKTOPUS
®
against any further use.
In case the RED charge level on the charge indicator lights up when the OKTOPUS
®
is
switched on, the timer for deactivation has been activated. This prevents non-permissible ac-
tivation of the unit for short periods by switching the unit on and off. The battery has to be
charged.
If no indication is given on the charge indicator when the OKTOPUS
®
is switched on, always
contact the service centre of Wirth GmbH immediately.
ATTENTION
