Test the contacts, voltages and sensors
Using a multimeter:
• Ensure that the control is receiving adequate voltage to the
power terminals and the demand terminals as noted in the
technical data
• Determine if the internal contacts on the control are opening
and closing correctly
• Follow the instructions in the Testing the Wiring section to
simulate the closed contacts on the terminal blocks as
required
• Test the sensors and their wiring as described in earlier
section
42
CONTROL FUNCTION
OVER
VIEW
CONTROL FUNCTION OVERVIEW - Section C - Troubleshooting
Summary of Contents for proMIX 101
