84
WPS-300-DVR-9CH & 16CH Installation and Users Manual
9.3.3 netWoRk
The Network Setup allows the administrator to setup all Ethernet network related parameters. Consultation
with the network administrator may be required to set these parameters correctly.
The following is a brief description for each item in this menu and its specific operations:
• NET TYPE
Select the type of network connection of the DVR to the network (DHCP, Static IP or PPPoE). DhcP
is enabled by default but a Static IP is recommended.
• IP ADDRESS
Enter an Ethernet IP address for the DVR. This address should not conflict with any other IP address on
the LAN.
• NET MASK
Enter the Net Mask for the IP address.
• GATEWAY
Enter the gateway IP address for the system.
• DNS
If using DNS, enter the Domain Name Server address for the system.
• USERNAME
If PPPoE is used, enter the username for the system.
• PASSWORD
If PPPoE is used, enter the password for the system.
• DDNS TYPE
If the ISP provider does not offer a static IP address for the network that the DVR is connected to, it is
recommended to use DDNS (Dynamic Domain Name Server) to be able to access the DVR even when
the network’s IP address changes. Contact the DDNS Service Provider to get the DDNS type, DDNS URL,
username, and password or refer to appendix e for details on how to use the free service from DynDns.
• URL
Enter the DDNS URL if DDNS is used.
• DDNS USERNAME
Enter the DDNS username if DDNS is used.
Summary of Contents for WPS-300-DVR-16CH
Page 124: ...110824 2011 Wirepath Surveillance...
