WirelessHART Rosemount 2160 WirelessHART, Reference Manual

Page: 22 / 100

Reference Manual
00809-0100-4160, Rev AB
March 2010
Rosemount 2160
2-4
NOTE
Before connecting a Field Communicator in an explosive atmosphere, make
sure the instruments are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
Figure 2-1.
Field Communicator Connection
For HART communication, a Device Description (DD) file for the Rosemount
2160 is required.
DEVICE NETWORK
CONFIGURATION
Join Device to Network
To communicate with the Smart Wireless Gateway, and ultimately the
Information System, the 2160 must be configured to communicate with the
wireless network. This step is the wireless equivalent of connecting wires from
a transmitter to the host system.
1. From the Home screen, select 2: Configure .
2. Select 1: Guided Setup .
3. Select 1: Join Device to Network .
Using AMS or a Field Communicator, enter the Network ID and Join Key so
they match the Network ID and Join Key of the Gateway and the other
devices in the network. If the Network ID and Join Key are not identical, the
2160 will not communicate with the network.
When using a Field Communicator, the Network ID can be configured by
entering Fast Key sequence: 2, 2, 1, 1. The Join Key can also be configured
using a Field Communicator with the Fast Key sequence: 2, 2, 1, 2.
NOTE
The Network ID and Join Key may be obtained from the
Setup>Network>Settings page on the Gateway’s web server.
COMM
P/N 00753-9200-0010
COMM COMM
P/N 00753-9200-0010 P/N 00753-9200-0010
Fast Keys
2, 1, 1