1
Approvals
Worldwide
FCC Statment
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any
radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user’s authority
to operate the equipment.
Declaration of Conformity
We:
Wireless Solution, Stureparksvägen 7,
451 55 Uddevalla, Sweden, Tel: +46 522 511 511,
declare under our sole responsibility that the products:
W-DMX T-1, S-1, S-2, R-512, S-1 Micro, R-512 Micro & R-512 Micro
Lite comply with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may
cause undesired operation.
To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to
try and correct the interference by one or more of the following
measures:
• Reorient or locate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
RF Exposure Warning for North America, and Australia
WARNING To meet FCC and other national safety guidelines for
RF exposure, the antennas for this device must be installed to en-
sure a minimum separation distance of 20cm (7.9 in.) from persons.
