11
EN
DE
FR
+44 (0)20 78941516
www.topregal.com
WIPEKET
FOREWORD
Congratulations on the purchase of your new SWM33 scrubber dryer. This easy to use cleaning machine is made of high-
quality materials and was especially designed for a reliable use and to last long. For your own safety and for the correct
operation of the machine, please read and follow these instructions before using the machine.
Keep this instructions manual. Check the cleaning machine for transport damage. Damaged scrubber driers must not be
used.
The SWM33 is a powerful scrubber-dryer for the residue-free cleaning of smooth floors and is therefore ideal for hotels,
guesthouses, office buildings, stores and exhibition halls.
Improper handling can cause damage to the machine or injuries. The operator / user must ensure correct use, making sure
that the scrubber drier is only used by instructed and authorized persons.
SAFETY INSTRUCTIONS
• Read and follow the instructions in this manual and the warning labels on the device before using it.
• Only operate the machine if you are familiar with it.
• Use the SWM33 only after you have checked its proper condition.
• Use the machine indoors only. Do not expose the machine to precipitation.
• Do not use the machine in explosive environments.
• Never sit or stand on the scrubber drier.
• This scrubber-dryer is only suitable for 220 V AC, 50 Hz.
• Only use the original accessories supplied with the unit.
• Never place the SWM33 directly next to a heater or oven.
• Do not use abrasive cleaners (scouring agents, thinner) to clean the scrubber dryer. These could attack the plastic
surface.
• This device is not suitable for use by physically, sensorially or mentally impaired people.
• If the power cord is damaged or loose, it must be replaced by the manufacturer’s service department or by qualified
personnel.
• Be sure to unplug the power cord from the wall outlet before cleaning the machine.
• Always disconnect the appliance from the power supply after using it.
• Do not place the device in rooms where temperatures may fall below freezing point, as this will damage the nozzles and
lines.
