2E1 to 2Eth Converter
２０
2 NO.5 dial-up switch on
3.Fault in Ethernet module
2. Turn SW5 to off.
3. Contact with supplier.
Data
can
PING,
but
lose
many
packets
1.many HUBER and PC
caused
data
packet
collision
2. Gridline is abnormal or
too long.
1. Replace HUBER with switch and
never have too much pc within one
conflict field.
2. Fabricating network cable again.
Low
Ethernet rate
1. Data collision in the
sectional network
1. Skip our device; check whether it is
caused by network conflict or other
reasons.
Typical application
