9
Function Button
P1~P3
Explanation
0. None
Assign the buttons to be no use.
1. Backlight
Press the button to enable the
backlight and press it once to turn
off the backlight.
2. DW
(Dual Watch)
Press this button to switch the
present channel with priority
channel. Press it once to restore to
the present channel.
3. TA
(Talk Around)
The setting on transmission
channel will change to the same as
the receiving channel, including the
frequency.
4. Scan
Channel Scanning will perform to
scan the Pri channel if it is set in
advance. If not, the radio will
perform the general scanning on
channels.
5. Power Switch
It can temporarily switch to High or
Low power when press this button.
The change on the channel will
restore to the factory setting.
6. GID (Group ID)
Switch
Select and switch to different
groups. (The functions is not
workable if the groups are not set
in advance )
7. Noise Cancel
NC function can elevate the quality
of voice in communication
8. Send Call Tone
Only long programmable keys can
set Send Call tone function.
Press the button longer to send out
the call tone. Release it to stop the
transmission.
9. Monitor
Only long programmable keys can
set Monitor function.
Press the button longer to enable
the monitor function, release the
button to stop in monitoring.
