Programmable
Functions
on 128Channels
Explanation
Tx Power
TX power is selectable to LOW or
HIGH.
TOT
TIME OUT TIMER is selectable to be
OFF, 30, 60, 90, 180, 360 sec.
BCLO
BCLO is selectable to be OFF / BCL /
BTL.
VOX
VOX TX is selectable to be OFF or
SENSITIVITY from L0~L9.
Scrambler
Selectable from 0~9. the “0” means to
turn off this function.
Compandor
Setting compandor “On” can enhance
the quality of voice in communication.
6
Introduction to Programmable
Functions
Use WPS-800 software for programming.
Please advice the official dealers to receive an authorized file to perform
the programming software.
Channl Setting
Programmable
Functions
on 128Channels
Explanation
Alias
It can be programmed and named the
Channel by defining the Name in
English or by numbers.
When General setting to be selected
as Channel Name, you can see the
Name defined on Channels
Tx Frequency
The TX step-up freq at 5Khz within
frequency range.
Rx Frequency
The RX step-up freq at 5Khz within
frequency range.
Tx Tone
CTS/DCS ENC is programmable to
“OFF”
CTS(1~51+1User Define)
DCS Normal(83+1User Define)
DCS Invert (83+1User Define)
Rx Tone
CTS/DCS ENC is programmable to
“OFF”
CTS(1~51+1User Define)
DCS Normal(83+1User Define)
DCS Invert (83+1User Define)
W/N band
RX/TX is selectable to Narrow Band
(2.5KHz) Or Wide Band (5KHz)
