8
Scan Setting
Programmable Keypads Controls & Functions
Programmable Key P1 ~P3 functions are operable only by
dealers. It is not intended for use by general consumers.
The the functions for P1 ~P3 can be defined separately in
long or short press on the buttons.
The Factory Default on programmable keys:
P1in long press: No use, short press: Noise Cancel
P2 in long press: Monitor, short press: Backlight
P3 in long press: No use, short press: Low and High Power
Switch
The radio will send out "Do Re Mi" melody to remind you that
Noise Cancel is on and send out " Do" melody when the
Noise Cancel is off.
Scanning
Functions
Explanation
PriCh
1. Priority cannel number must be selected
before this function is activated for Priority
Scan and Dual Watch function.
2. When PRI Channel is activated, priority
channel will automatically be scanned on
the channel and transmission is done from
it.
Response
There are three kinds of scanning modes
BR / TR / HOLD
BR:
The scanning process will pause
when signal comes in and perform
scanning again when signal discontinued.
TR:
The scanning process will pause by 3,
5, 10 secs once signal comes in and
continue to perform scanning after time out
again even during the signal is receiving.
HOLD:
The scanning process will stop
immediately and skip out when signal
comes in. It needs to be started again for
continuing the scanning.
Time
TR time can be set by 3, 5, and 10 secs.
Group
There are totally 16 groups that can be set
by channels.
