15
VoX Levels Setup
This Function is setting the volume level of VOX function,higher level ,bigger volume.1-9 vox levels available.
Pressing the programmed key
[PF1]
/
[PF2]
of "vox levels setup",the transceiver announce the current vox level ,press the
key again to choose the 1-9 vox levels .
NoTe:Switch on the vox level function before start vox levels setup,otherwise it will invalid.
TIP:If the transceiver programme the VoX prompt function ,it will announce the vox levels by voice
prompt.
Squelch off
pressing the programmed key
[PF1]
/
[PF2]
of "squelch off",the squelch circuit is not mute and at present you can hear the
background noise.Press this key again,the squelch circuit becomes mute .By using this function could monitor the weaken signial
which is hard to receive.
Switch Into PRI Channel
pressing the programmed key of "switch into PRI channel",switch the transceiver to PRI channel.
NoTe:It need to set the PRI group by programming software first and then could use this
function.
Battery Capacity enquiry
pressing the programmed key of "battery capacity enquiry",the transceiver announces beep prompt voice,prompt the current
ADVANCeD oPeRATIoN