04
How to Charge
Plug the AC adaptor into the AC outlet, and then plug the cable of the AC
1.
adaptor into the DC jack located on the back of the Charger. The Indicator lights
orange (1s) and then goes out----waits to charge.
Plug the battery or transceiver into the charger. Make sure that the battery
2.
terminals are in contact with charging terminals well. The Indicator turns into
twinkling red-----Pre-charging begins.
After pre-charging for about 5 minutes, the indicator will stop twinkling----
3.
charging begins.
It takes approximately 4 hours to fully charge the battery. When the lamp lights
4.
green, the charging is finished. Remove the battery or the transceiver equipped
with battery from socket.
NoTe:when charging a power-on transceiver equipped with battery.The indicating lamp will not turn
into green to show the fully charged status.only when the transceiver is switched off.Can the lamp
indicate mornally.The transceiver consumes energy when it is power-on and the charger can not detect
the viltage when the battery has been fully charged.So the charger will charge battery in constant voltage
and fail to indicate correctly whether the battery has been charged fully.
Charging Process
5.
BATTeRY INFoRMATIoN
Ac Input
Charging Status
Indicator Status
None
Red light twinkles for about
5 minutes
Lights red for about 4 hours
Lights green
Standby (Self-examine lights orange 1second
when power on)
Pre-charging (Pre-charging stage)
Charging (Charge in a constant current)
Fully charged (Charge in a constant voltage)
