12
The
[PF1]
and
[PF2]
key for this model are programmable ,they could come to the follow functions by programming software.
NoTe:If programme the follow functions as long key ,you need to press [PF1] /[PF2] key until reach
the setting time to realize the programmed long press key function.
call
Under standby state ,press programmed key
[PF1]
/
[PF2]
to transmit the prestored and selected DTMF signialing.
Monitor
Under standby state ,press programmed key of monitor
[PF1
] /
[PF2]
,the transceiver emits "DU" beep and then come to
monitor state.Under these state ,transceiver will ignore CTCSS/DCS decode and monitor signal of the other party as long as
receiving the matched carrier wave .Press this key again ,transceiver emit "DU DU"beep and exits the monitor state.
Scan
Scan function can be used in monitoring every channel of current group.
Under standby state,press programmed key of scan
[PF1]
/
[PF2]
,the transceiver emits "DU" beep and then come to scan
state.When one signial receives a matching signial the transceiver will stay 5 second and then continue scanning(please refer to
scan setup) .Repeat the operation until transceiver emits "DU DU "beep exits scan .
Temporary Delection of Interfering Channel
This function can temporarily delete the interfering channel or occupied channel from scan list.When scan stops on the one
ADVANCeD oPeRATIoN