11
NoTe
You could press
[PF1]
mintor key to control the background volume.Meanwhile turn
(PoWeR)/(VoLUMe)
to adjust
volume .The volume will be adjusted more correctly when communicate with other party.
Channel selection
Under standby mode, turn band switch to get the channel you want:turn band switch clockwise to turn to down channel.
Anticlockwise to turn to up channel.
NoTe:If there the transceiver programming the Voice prompt ,the transceiver will emits the voice
to prompt the current channel when user switch the channel .
Receiving
You can hear the transmission party's calling when the channel you are operation is called and the LCD light turn green.
NoTe: When your transceiver is setup of higher squelch level, you may not receive this calling.
If current channel is programming of decode signaling, only the same signaling call can be heard
but not other calls.
Transmitting
Before transmitting, it is recommended to monitor the channel you are using to ensure it is not busy by .And keep press PTT
button and start talking at about 2 inches from the speaker hole.Speak in normal tone to get the best acoustic fidelity.
NoTe: Press PTT,it is transmitting when LeD light is on,Release PTT to receive signal.
BASIC oPeRATIoN