manualshive.com logo in svg

WinSystems SYS-405, Product Manual, Page: 46 / 57

Share
Download
WinSystems SYS-405 Product Manual Download Page 46

SYS-405/BIOS Settings

v1.0

www.winsystems.com

Page 42

•

Chipset SATA: Enables or disables the chipset SATA controller. The chipset SATA 

controller supports both internal SATA ports (up to 3Gb/s supported per channel)

Default Setting/Value: Enable

•

SATA Test Mode: Enables or disables test mode.

Default Setting/Value: Disable

•

Chipset SATA Mode: When IDE is selected, compatibility mode disables AHCI. 

When AHCI is selected, advanced SATA features such as Native Command Queuing 

are supported. 

Default Setting/Value: AHCI

LAN Configuration

This subset of the South Cluster Configuration menu provides LAN configuration 

options.

•

PXE ROM: Enables or disables PXE Option ROM execution for onboard LAN.

Default Setting/Value: Disable

Miscellaneous Configuration

This subset of the South Cluster Configuration menu provides miscellaneous 

configuration options.

•

State After G3: Specifies in which state to begin when power is re-applied after a 

power failure (G3 state).

Default Setting/Value: SO State

•

SMM Lock: Enables or disables the SMM Lock feature. This locks the SMRAM and 

disables the SMM driver.

Default Setting/Value: Enable

•

PCI MMIO Size: Sets the PCIO MMIO size.

Default Setting/Value: 2 GB 

Security Configuration

TXE FW Version (Read Only)

Default Setting/Value: 1.0.2.1067

Warning

OS may not boot if this setting is changed after OS install.

Summary of Contents for SYS-405


























































Reviews:

No comments