manualshive.com logo in svg

WinSystems SYS-405, Product Manual, Page: 45 / 57

Share
Download
WinSystems SYS-405 Product Manual Download Page 45

SYS-405/BIOS Settings

v1.0

www.winsystems.com

Page 41

•

PCIe 3 Speed: Configures PCIe 3 speed.

Default Setting/Value: Auto

•

PCI Express Root Port 1: Controls the PCI Express Root Port 1 (MiniPCIe)

Default Setting/Value: Enable

•

PCI Express Root Port 2: Controls the PCI Express Root Port 2 (MiniPCIe)

Default Setting/Value: Enable

•

PCI Express Root Port 3: Controls the PCI Express Root Port 3 (Ethernet, Carrier)

Default Setting/Value: Enable

•

PCI Express Root Port 4: Controls the PCI Express Root Port 4 (Ethernet, Carrier)

Default Setting/Value: Enable

USB Configuration

This subset of the South Cluster Configuration menu provides USB configuration 

options.

•

XHCI Link Power Management: Enables or disables XHCI link power management 

(USB 3.0).

Default Setting/Value: Enable

•

EHCI Controller: Controls the USB EHCI 9USB 2.0) functions. One EHCI controller 

must always be enabled.

Default Setting/Value: Enable

•

USB Per-Port Control: Allows USB ports 0-3 individual power control. 

Default Setting/Value: Enable

•

USB Port #0: Enables or disables the USB port.

Default Setting/Value: Enable

•

USB Port #1: Enables or disables the USB port.

Default Setting/Value: Enable

•

USB Port #2: Enables or disables the USB port.

Default Setting/Value: Enable

•

USB Port #3: Enables or disables the USB port.

Default Setting/Value: Enable

Audio Configuration

This subset of the South Cluster Configuration menu provides audio configuration 

options.

LPE Audio Support: Selects LPE Audio ACPI mode or PCI mode.

Default Setting/Value: Disable 

Audio Controller: Controls detection of the Azalia device. When disabled, Azalia is 

unconditionally disabled; when enabled, Azalia is unconditionally enabled.

Default Setting/Value: Enable

SATA Drives

This subset of the South Cluster Configuration menu provides SATA drive options.

Summary of Contents for SYS-405


























































Reviews:

No comments