manualshive.com logo in svg

WinSystems SYS-405, Product Manual, Page: 42 / 57

Share
Download
WinSystems SYS-405 Product Manual Download Page 42

SYS-405/BIOS Settings

v1.0

www.winsystems.com

Page 38

Limit CPUI Maximum

Disabled for Windows XP.

Default Setting/Value: Disable

Bi-directional PROCHOT#

When a processor thermal sensor trips (either core), the PROCHOT# will be driven. If 

bi-direction is enabled, external agents can drive PROCHOT# to throttle the processor.

Default Setting/Value: Enable

VTX-2

Enables or disables the VTX-2 Mode support.

Default Setting/Value: Enable

TM1

Enables or disables TM1, which is a thermal monitor based on clock throttling.

Default Setting/Value: Enable

DTS

Enables or disables the digital thermal sensor, which protects the processor from 

overheating.

Default Setting/Value: Enable

CPU Power Management

This subset of the CPU Configuration menu provides CPU power management options.

•

Intel

®

 SpeedStep

™

: Enables or disables the processor’s performance states 

(P-States)

Default Setting/Value: Enable

•

Boot Performance Mode: Selects the performance state that the BIOS will set before 

OS handoff.

Default Setting/Value: Max Performance

•

Intel Turbo Boost Technology: Enable to allow processor cores to run faster than 

the base operating frequency if it is operating below power, current, and 

temperature specification limits.

Default Setting/Value: Enable

•

C-States: Enables or disables C-States

Default Setting/Value: Disable

Summary of Contents for SYS-405


























































Reviews:

No comments