SBC35-C398/Configuration
v1.0
www.winsystems.com
Page 40
8.6.4 Boot Mode Jumper (JP5)
Purpose:
JP5 selects the boot mode for the SBC35-C398. The default JP5 set for
Internal Boot mode (jumper installed on Pins 3-4).
Jumper Pin Reference
:
Additional Information
This connection is a Samtec TMM-104-01-G-D-SM-P-TR.
Jumper Kit: KIT-JMP-G-200
8.6.5 CAN Termination Jumper Block (JP6)
Purpose:
For high speed Controller Area Network (CAN), both ends of the pair of signal
wires (CANH and CANL) must be terminated. JP6 allows the user to add 120
(ohm)
differential termination to the signal pairs when necessary. If you place multiple devices
along the cable, only devices on the ends of the cable need termination resistors.
Jumper Pin Reference
:
Additional Information
Jumper Kit: KIT-JMP-G-200
Description
Boot Mode
Jumper Pins
Boot from fuses
0 0
No Jumpers
Serial downloader (USB OTG)
1 0
1 – 2
Internal boot
0 1
3 – 4
Reserved
1 1
1 – 2, 3 – 4
1
2
7
8
Pin
Function
1
CAN1L
2
CANH (120 Ohm Termination)
3
CAN2L
4
CANH (120 Ohm Termination)
1
2
3
4
