SBC35-C398/Configuration
v1.0
www.winsystems.com
Page 24
To install a miniPCIe into J7:
8.5.8 Micro USB (USB OTG) (J8)
The USB on-the-go (OTG) connector enables the SBC35-C398 to be connected to a USB
host (such as a desktop PC), allowing the SBC35-C398 to appear as a USB flash drive,
digital audio device, camera, etc. The USB OTG port can also be used as a debug
interface to the SBC35-C398 when it runs certain operating systems such as Android.
Host or Client
If the cable assembly that is plugged into J8 grounds pin four (4), the SBC35-C398 is
the host. If the cable assembly plugged into J8 does not ground pin four (4), the
SBC35-C398 is the client.
1. Insert the miniPCIe.
2. Push the free end of the card toward the circuit board and then secure it
with two (2 mm) screws (WinSystems P/N: G527-0000-400).
