PPC65BP-1x/Configuration
v1.0
www.winsystems.com
Page 25
7.11 Reset CMOS BIOS Configuration
Jumpers can be used to reset the BIOS CMOS settings to the factory
default. Enable/disable the Clear CMOS Function hardware circuit, by
placing or removing the jumper from JP1 as needed. See “Reset CMOS
BIOS Configuration” on page 54 for usage.
8.
Configuration
This section describes the PPC65BP-1x components and configuration.
8.1
Component Layout
The PPC65BP-1x provides edge connectors for common external
connections (see “Connecting Components” on page 18), and internal
connections to components on the board.
8.1.1 Internal Components
The following figures illustrate the location of each connector, jumper,
and switch on the PPC65BP-1x main board (internal).
Pin 1 of each connector or jumper is indicated by a red square in the
figure.
Summary of Contents for PPC65BP-1 Series
Page 59: ...PPC65BP 1x v1 0 www winsystems com Page 59 PPC65BP 12 Dimensions...
Page 60: ...PPC65BP 1x v1 0 www winsystems com Page 60 PPC65BP 15 Dimensions...
Page 61: ...PPC65BP 1x v1 0 www winsystems com Page 61 PPC65BP 17 Dimensions...
Page 62: ...PPC65BP 1x v1 0 www winsystems com Page 62 PPC65BP 19 Dimensions...
