WinSystems PPC65BP-1 Series, Product Manual

Page: 47 / 63

PPC65BP-1x/BIOS Settings
v1.0 www.winsystems.com Page 47
Wake on Ring Controller
Enable or disable GPIO wake on Ring function. Choices: Disabled (default),
Enabled.
Wake System from S5
Enable or Disable System wake on alarm event. Select Enable to have the
system wake on the hr: mm: sec: specified. Choices: Disabled (default),
Enabled.
Super I/O Configuration
Use the Super IO Configuration screen to set the System Super IO Chip
Parameters.
Serial Port
Enable or Disable Serial Port (COM) IO=3F8H; IRQ=4. Choices: Disabled,
Enabled (default).
Interface
Set present UART mode RS232, RS485, RS485/RS422. Choices:
RS232(default), RS485 HALF DUPLEX, RS485/422 FULL DUPLEX.
Termination Control
Set Termination Control to Disabled/Enabled. Choices: Disabled, Enabled
(default).
Direction Control
Set Direction Control to Enabled (Transceiver) or Disabled (Receiver).
Choices: Disabled (default), Enabled.
Serial Port
Enable or Disable Serial Port (COM) IO=2F8H; IRQ=3. Choices: Disabled,
Enabled (default).
Interface
Set present UART mode RS232, RS485, RS485/RS422. Choices:
RS232(default), RS485 HALF DUPLEX, RS485/422 FULL DUPLEX.
Termination Control
Set Termination Control to Disabled/Enabled. Choices: Disabled, Enabled
(default).