WinSystems EBC-LP Operation Manual Download Page 52

Page: 52 / 89

14 min utes
15 mi nutes

Throttle Duty Cycle

This option selects the throttle rate of the main system clock during power management. The

choices are:

12.5%
25.0%
37.5%
50.0%
62.5%
75.0%

ZZ Active in Suspend

This option, when enabled, puts the on-board L2 cache into sleep mode during power management.

PCI/VGA Act-Monitor

This option, when enabled, monitors activity of VGA for power management.

CPUFAN Off In Suspend

This option, when enabled, shuts off power to the CPU fan when the system is in suspended mode.

PowerOn by Ring

This option is not supported on the EBC-LP. Contact WinSystems’ tech support for further

information

Resume by Alarm

This option, when enabled, will wake the system from power management mode.

IRQ 8 Break Suspend

This option, when enabled will wake the system from suspended mode using interrupt request 8.

IRQ [3-7, 9-15],NMI

030530

EBC-LP OPERATIONS MANUAL

Page 3-17

WinSystems

- "The Embedded Authority"

Summary of Contents for EBC-LP


























































































Search results

Summary of Contents for EBC-LP

Reviews:

Related manuals for EBC-LP

Brands by name

Popular brands

WinSystems EBC-LP, Operation Manual

Search results

Summary of Contents for EBC-LP

Reviews:

Related manuals for EBC-LP

Brands by name

Popular brands