WinSystems EBC-LP, Operation Manual

Page: 39 / 89

13 20 306 8 17 128 319
14 42 733 7 17 None 733
15 Re served
16 20 612 4 17 0 663
17 40 977 5 17 300 977
18 56 977 7 17 None 977
19 59 1024 7 17 512 1023
20 30 733 5 17 300 732
21 42 733 7 17 300 732
22 30 306 5 17 300 733
23 10 977 4 17 0 336
24 40 1024 5 17 None 976
25 76 1224 9 17 None 1023
26 71 1224 7 17 None 1223
27 111 1224 11 17 None 1223
28 152 1024 15 17 None 1223
29 68 1024 8 17 None 1023
30 93 918 11 17 None 1023
31 83 925 11 17 None 1023
32 69 1024 9 17 None 926
33 85 1024 10 17 None 1023
34 102 1024 12 17 None 1023
35 110 1024 13 17 None 1023
36 119 1024 14 17 None 1023
37 17 1024 2 17 None 1023
38 136 1024 16 17 None 1023
39 114 918 15 17 None 1023
40 40 820 6 17 None 820
41 42 1024 5 17 None 1023
42 65 1024 5 26 None 1023
43 40 809 6 17 None 852
44 61 809 6 26 None 852
45 100 776 8 33 None 775
46 203 684 16 38 None 685
Press PgUp or PgDn to se lect a num bered hard disk type, or type the number and press ENTER.
Most manu fac tur ers sup ply type in for ma tion with their drives that can be used to help iden tify the
proper drive type. Mod ern IDE drives sel dom fall into the pre de fined types and are usu ally best han dled
with the “auto” or “user” types. The “auto” mode, reads the hard disk type in for ma tion from the drive at
boot time and uses it to ac cess the drive. The “user” mode al lows for ei ther man ual or auto mat ic en try,
via the setup op tion “IDE Auto De tect” of the drive pa rame ters.
If you de cide to cre ate the user type manu ally, you must sup ply the re quired pa rame ters as to
Cyl in der count, Head count, Pre comp Cyl in der, Land ing Zone Cyl in der, and number of sec tors per
track.
On Hard disks larger than 528MB, it will be nec es sary to choose the Logi cal Block Ad dress ing
mode (LBA) if you wish the drive to be ac ces si ble as a sin gle drive let ter.
Page 3-4 EBC-LP OPERATIONS MANUAL 030530
WinSystems - "The Embedded Authority"