Technical Specifications
Installation Instructions
Operation Voltage: DC 10-16V
Operation Temperature: -20~70
℃
Sensor Horizontal Detection Angle: 120°
IMPORTANT:
To ensure proper installation, it is highly
recommended for this unit to be installed by a professional.
These instructions do not apply to all types of vehicles.
They are meant only as a general guide due to the large
number of vehicle makes and models. For vehicle specific
questions, contact your vehicle’s manufacturer.
Consult your local motor vehicle laws on the use of this
product to be sure it is permitted.
WARNING:
• Through installation of the Blind Spot Assist System you
should be sure not to degrade the safety of any system
or device on your vehicle, including Federal Motor Vehicle
Safety Standards.
• Improper installation and wiring of the Blind Spot Assist
System may damage the vehicle’s electrical system,
including vital vehicle computer and operating systems.
That could lead to an accident or fire, causing property
damage and/or serious personal injury. It is highly
recommended to seek professional installation advice
from a qualified auto electrician or, in the alternative,
to have the installation performed by a qualified auto
electrician.
Wiring Diagram
Connect power wire (Red)
NOTE:
Power wire must be controlled by ignition ON/OFF.
8
