SAFE OPERATING TIPS
• Do not scratch the sensor when cleaning dirt or snow
from the cover.
• The sensor has a water resistant construction. Do not
detach, disassemble or modify it. This may cause
incorrect operation. Sensor is water resistant but not
waterproof.
• Do not submerged sensor in water, which can cause
internal damage.
• If the temperature changes rapidly, such as when hot
water is poured on the vehicle in cold weather, the system
may not operate normally. The system can withstand the
effects of rain, snow, and inclement weather.
• If dirt, rain or snow attaches to the sensor, the system
may not clearly sense objects. If water droplets, snow or
mud adhere to the sensor lens, rinse with water and wipe
with a dry cloth.
• Do not use alcohol, benzene or thinner to clean the
sensors. This will damage the sensors. To clean the
sensors, wipe with a clean a cloth dampened with mild
cleaner diluted with water and then wipe with a dry cloth.
• The system is only designed to help detect obstacles in
the vehicle’s blind spots. WINPLUS is not responsible for
damages on the system or the vehicle if used for other
purposes.
• ALWAYS engage Parking/Emergency/Hand Brakes of the
vehicle when testing the system.
• The system is designed to ADD safety and protection.
The device was NOT designed to replace other safe
driving habits. Double checking and looking around
before performing vehicle maneuvers is STILL the safest
way.
• Do not paint over the sensor because it will affect the
degrade the sensitivity or damage the system completely.
function setting button
DISPLAY SETTING
OPERATION
MODE
DISPLAY
Press and hold the function
setting button for 1-2
seconds
Volume High
3
Volume Middle
2
Volume Low
1
Volume Off
0
Press and hold the function
setting button for 3-4
seconds
Turning Alarm Switch On
C1
Turning Alarm Switch Off
C0
11
