INSTRUCTION MANUAL (GB)
FOREWORD :
We thank you for buying this Winntec quality product. Before using
this product, carefully read these instructions and become acquainted
with the safety symbols.
GENERAL SAFETY REGULATIONS
(ALSO SEE SAFETY SYMBOLS ON
PRODUCTS LABEL)
:
•
This product is designed and made only for lifting vehicles.
•
Never lift loads on sloping, uneven or soft ground.
•
Before starting lifting, it is necessary to block the vehicle by
placing two wedges by the wheels, as shown on the label.
•
Make sure that the vehicle lifting point suggested by the car
manufacturer is stable and properly centered on the jack saddle.
•
After lifting the load it is absolutely essential to rest it on
carstands.
USE
(ALSO SEE SAFETY SYMBOLS ON THE PRODUCTS LABEL)
:
•
Insert the handlebar into the handle fork of the jack.
•
Make sure that the vehicle lifting point suggested by the car
manufacturer is stable and properly centered on the jack saddle.
•
Start lifting and do not exceed the rated load.
•
After lifting the load
→
, always place carstands.
•
To lower the jack, remove the carstands and
←
MAINTENANCE :
•
Keep the jack at minimum height when not in use. Make sure that
the pressure release valve is closed.
•
Keep the jack clean and check the oil level at least twice a year.
GARANTEE
:
This Winntec product is fully guaranteed against manufacturing defects
for a period of
36
months from the date of purchase.
If your product proves faulty during the guarantee period, it
should be returned to the place of purchase together with the original
receipt.
Summary of Contents for Y411350
Page 1: ...ALUMINUM GARAGE JACK Y411350...
Page 2: ......
