2-13
SECTION 2 –
SAFETY AND PRECAUTIONS
WHEELS – STYLIZED
ALUMINUM
(Mercedes-Benz
®
Sprinter Chassis)
–
If Equipped
The Alloy Wheels, hub covers, and push on
nut covers are mounted with the chassis supplied
lug nuts which are concealed by push on nut
covers.
Note: Reference the chassis manufacturer’s user
guide provided in your InfoCase for
complete instructions and cautions on
changing a wheel.
•
Before removing lug nuts, remove the push on
nut covers. To make the removal process less
challenging, it is recommended that you wrap
each individual jaw of pliers with electrical
tape or use a commercial lug nut cover
removal tool (not provided).
Further Information
See the chassis manufacturer’s user guide
provided in your InfoCase for complete
instructions and re-torque information.
JUMP STARTING
If you wish to try jump starting the engine
using another vehicle or booster system, see the
chassis manual for connecting jumper cables to
the automotive electrical system.
ENGINE OVERHEAT
If you see or hear steam escaping from the
engine compartment or have any other reason to
suspect an extreme engine overheating condition,
pull the vehicle over to the roadside as soon as it
is safe to do so, stop the engine, and get all
passengers out of the vehicle.
For information on what to do in case of
overheating, consult the chassis manual.
Stylized Aluminum Wheel
Remove the push on nut covers.
WARNING
DO NOT operate the vehicle with less
than all 6 nuts installed and properly
torqued.
NOTICE
Do not attempt to push start this vehicle.
Damage to the transmission or other
parts of the vehicle will occur.
NOTICE
Operating a vehicle under a severe
overheating condition can result in
damage to the vehicle.
