![background image](http://html1.mh-extra.com/html/winnebago/2009-ellipse/2009-ellipse_user-manual_987445036.webp)
SECTION 3 –
DRIVING YOUR MOTOR HOME
3-12
SIGNAL LEVER/HEADLIGHT
HI/LO BEAM
The signal lever controls the turn signals and
high/low beam changing.
Move multi-function lever upward for right turn
signal and downward for left turn signal. An
audible chime will alert you when the signals are
flashing.
Pull end of handle toward you to switch
headlight high/low beams.
MAP LIGHT SWITCH
Turn the map light on using the Panel Light
brightness thumbwheel control. Roll it upward
until you feel it click into the map light “On”
position.
The “Cargo” Switch and the “Push” Switch
(for fog lights) are non-functional.
Further Information
See your chassis manual in your InfoCase for
further information on this switch.
STEERING COLUMN
ADJUSTMENT
The tilt/telescope adjustment pedal is located
on the floor to the left of the steering column as
shown.
Adjust Steering Wheel or Column
Press the pedal down to adjust either the tilt or
telescope. Release the pedal when you have
adjusted the tilt angle or steering wheel distance
to your preferred position.
Turn Signals/Hi-Lo Beams
WARNING
Do not adjust the steering column or tilt
wheel while the vehicle is in motion. This
could cause a loss of vehicle control.
Press pedal to adjust steering
wheel tilt or telescope