![background image](http://html1.mh-extra.com/html/winnebago/2009-ellipse/2009-ellipse_user-manual_987445114.webp)
SECTION 8 –
ENTERTAINMENT
8-8
signal amplifier designed to strengthen signals, is
controlled by a power switch built into the video
selector panel.
See the antenna manufacturer’s operation,
care and maintenance information in your
InfoCase.
Control Panel Functions:
(If all three antenna position indicator lights
are blinking, there is an obstruction. See Trouble
Shooting in the manufacturer’s operating guide
in your InfoCase.)
Raising Antenna to Operating Position
1. Press antenna control panel “POWER”
button.
Power indicator will come on and one of the
three middle lights will also light to show
antenna position.
2. Press “RAISE/STOW” button.
The antenna will raise automatically and the
MOTION indicator will light up until the
antenna is raised. When antenna has raised
fully, the MOTION light will turn off and the
RAISED light will turn on.
3. Press “TV Ant. Power” button on video
selector panel to turn TV Signal Amplifier
On.
Rotating Antenna for Best Picture
1. Press and hold the “Rotate” counter-
clockwise button to rotate antenna towards
signal. MOTION light will turn on while
antenna is rotating. View your TV picture and
release button to stop antenna rotation when
TV picture appears to be the best quality for
your location.
NOTE: If pressing a “Rotate’”button does not
turn on the Motion light, the antenna is
at its maximum rotation in that direction,
or not in up position. Press the other
“Rotate” button or make sure antenna is
fully raised.
2. To view a different TV channel, switch TV to
channel you desire and press and hold one of
the “Rotate” buttons until the TV picture
appears to be the best quality for your
location.
Lowering Antenna to Travel Position
1. Press the “RAISE/STOW” button to lower
and stow antenna.
The MOTION indicator will light up and the
antenna will automatically return to its home
position before stowing. When antenna has
lowered completely, the MOTION light will
turn off and the STOWED light will turn on.
2. Press “POWER” button on control panel to
turn system Off.
3. Press “TV Ant. Power” button on video
selector panel to turn TV Signal Amplifier
Off.
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires.
CAUTION
Before moving RV, antenna must be in
stowed position. Visually confirm antenna
is down before moving.