![background image](http://html1.mh-extra.com/html/winnebago/2009-ellipse/2009-ellipse_user-manual_987445031.webp)
3-7
SECTION 3 –
DRIVING YOUR MOTOR HOME
*Set screws may be located on the opposite side
of the mirror arm. Passenger and Driver side
mirrors are similar.
If mirror arm will not pivot with set screws
loosened, you may also need to loosen the mirror
arm pivot bolt on the underside of the mounting
base shown. Be sure to tighten this bolt when
adjustment is done.
REARVIEW MONITOR SYSTEM
–If Equipped
Allen Head Set Screw*
(Torque screw to 75-100 in./lbs.)
Mirror Arm Mounting Base
Unscrew protective caps and loosen Allen
head set screws to pivot mirror arm.
(Torque screws to 75-100 in./lbs.)
Carefully pry out plug on underside
of mirror base to access pivot bolt
Mirror Arm Pivot Bolt
on underside of mounting base
- Shown with access plug removed
(Torque nut to 75-100 in./lbs.)