ASKLÉ
SANTÉ
- 7 -
U
SE
Indicates the compressor is on
Flickers to indicate inflation of the mattress
After it has gone off, the patient can be placed on it
When this light is lit, it indicates that the keypad is locked: it is not
possible to change mode.
To unlock the keypad, you must press down continuously for 4
seconds.
Locking is automatic after 5 minutes or can be ordered by pressing
down continuously for 4 seconds.
Low pressure dynamic mode: triggers alternation of one in two cells
(except the 3 head cells). Alternation takes place every 7 minutes.
Care mode (static): makes the surface of the mattress firm in order to
facilitate handling of the patient during care or getting them up (eg.
transfer to a flat bed chair).
Duration of this mode is limited to 30 minutes.
Securing care mode: flickering of the care mode light indicates that
the mode is almost finished. It is triggered 5 minutes before the end. A
sound signal is emitted when triggered.
At the end of the 30 minutes, the compressor automatically switches
into the mode previously used.
Low pressure static mode: inflates all cells in the mattress at a constant
pressure depending on the shape and size of the patient and
promotes their immersion in the support in order to increase the
supporting surface and thus reduce the average interface pressure.
Fixed LED: Low severity alarm. (see alarm chapter)
Flickering LED: Medium severity alarm. (see alarm chapter)
Pressing on the button: stops sound alarm
Allows you to get technical information on operation (see
maintenance-revision chapter)
The following terms of use must be respected:
Temperature: between +15°C and + 40°C
Humidity levels: between 30% and 93%
Altitude: less than 2000m
