ASKLÉ
SANTÉ
- 9 -
D
E
-
INSTALLATION
1.
Unplug the compressor from the mains
2.
Open the CPR valve to deflate the mattress. Total removal of air from the mattress
can be facilitated by use of the inflation/deflation pump connected to the CPR.
3.
Position the compressor in the centre of the mattress.
4.
Roll the mattress up, starting at the feet
5.
Strap up the mattress.
6.
Insert the mattress into the transporting bag provided upon delivery of the
product.
7.
Position the dirty/clean label so as to make the yellow face visible.
Blue label: the mattress is clean Yellow label: the mattress is dirty
(risk of contamination)
S
TORAGE AND TRANSPORT
A model identification label allows you to identify which product from the Axtair range
is in the bag. This label must be visible during storage.
The following storage and transport conditions must be respected:
Temperature: between -25°C and + 70°C
Humidity levels: between 30% and 93%
Atmospheric pressure: between 50kPa and 106 kPa
WARNING:
Keep the device away from sources of humidity, direct sunlight and constant heat
sources.
Prevent the risk of shocks or damage by sharp objects.
NOTE:
The MANUFACTURER shall make available, on request, the circuit diagrams, lists of
components, descriptions, calibration procedures and any other useful information
to UPKEEP and MAINTENANCE STAFF to carry out authorised repairs in accordance
with the contract which ties the requesting party to the manufacturer, ASKLE.
