ASKLÉ
SANTÉ
- 6 -
NOTES:
The necessary information for use of the compressor is noted on the side of the latter:
simplified instructions
After 30 minutes without selection, the intensity of lights will dim so as not to bother
the patient during the night. Pressing a button re-activates the maximum intensity for
30 minutes.
The pneumatic connector is self-blocking and rebalances the pressure in the
mattress when it is disconnected from the compressor.
• The passage in static mode requires the finalization of pressure calculation. If the
static mode is activated when the calculation is completed, the compressor inform
you and alternate until the end of the calculation.
The end of this calculation requires the presence of a patient on the support. In case
of the absence of patient, the alternate pressure will continue even in static mode.
At the end of the calculation pressure, the compressor will switch into the selected
mode.
WARNING:
The electrical cable must be installed so as to avoid any crossover with the
articulated parts or wheels of the bed and prevent staff from tripping. Risk of bodily
injury and material damage. Use the detachable hook systems provided.
The power cable makes up the isolation system for the device.
The compressor keypad, the power cable, the pneumatic connector and the CPR
valve must be visible and accessible at all times.
The AXENSOR® box must always be placed in the elastic pouch located on the inner
side of the ad-hoc mattress.
