FM08 Product Reference Guide
78
RAM Mount Assembly
Step 1
Install RAM Clamp to vehicle or forklift
1.1 Determine the position for mounting the RAM clamp mount according to RAM Mounts installation
guide and specification.
1.2 Place the upper clamp with ball on the beam, insert the bolt.
1.3 Place the lower clamp below the beam. Align the bolts with the holes in the lower clamp.
1.4 Place the nuts and then tighten it.
Step 2
Install RAM Ball base to vehicle dashboard / other surface.
2.1 Please make sure that the surface is flat and rigid.
2.2 Attach the RAM ball base to the vehicle and fix it using bolt or fasteners.
Step 3
Attach RAM Mount Ball to the device docking.
3.1 Turn the device off before installing the RAM mount ball.
3.2 Locate the VESA mount holes on the back of the device and align it with the holes from RAM Ball
base. Fix with four M5 screws.
Step 4
Attach the device to RAM arm.
4.1 Insert the RAM arm over the ball on the vehicle RAM mount (shown here).
4.2 Insert the ball on the dock into the RAM arm and tighten the knob.
