Winix HR900, User Manual

Page: 13 / 72

13 English HR900
FILTER CARE
1. Changing Filters
When the Check Filter indicator LED is on, it is time to replace both the
True HEPA and AOC™ Carbon Filters.
Filter Indicator light When to service When to replace
2
Pre-filter none
Clean once every
14 days
Permanent
3 AOC™ Carbon filter Clean once every
3 months
Lasts up to
12 months
4 True HEPA filter Can NOT be
WASHED
•
Intervals between filter replacement may vary depending on environment.
•
For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
1. Installing the Pet Filter
Latch
Filter Replacement Period
Filter Type Replacement Period Quantity
Pet-filter 1 Month 12 Per Pack
The Replacement Period may be different depending on the surrounding environment
Customer Service and Purchase Inquiry
www.winixamerica.com | info@winixinc.com
For optimal performance, only genuine Winix filters
should be used with your Winix Air Purifier
1. Remove the front panel by grasping
the upper edges and gently pulling the
front panel toward yourself.
The latch at the lower edge of the panel
must be released from its position.
2. Press the tabs on the top edge of
the pre-filter to remove it.
3. Remove the liner around the outside
of the pet filter to reveal the adhesive
tape.
4. Attach the Pet-filter to the front of the
Pre-filter.
Press the adhesive tape around the edge
of the pre-filter to adhear it to the pre-filter.
5. Insert the Pre-filter
Insert the bottom tabs into the slots on
both sides of the lower part of the unit.
Rotate the top of the filter upward and snap
the upper tabs into the slots securing the
pre-filter in place.
6. Replace the front panel by first
inserting the latch at the bottom
edge into the base of the unit,
then rotate the panel upward
toward the top of the unit until it
magnetically snaps closed.
Tabs