Winix HR900, User Manual

Page: 4 / 72

4 English HR900
CONTROLS
Air Outlet Vent
Light Sensor
Detects the amount
of ambient light within
the environment,
to adjust the brightness
of the LED indicators.
Mode / Fan Speed Button
Every time the Mode button
is pressed, the Mode LED light
will cycle through the settings.
(Auto, Sleep, Low, Medium,
High, Turbo)
Child Lock Button
Press and hold for 3 seconds
to enable or disable
the Child Lock mode.
Timer Indicator
If timer has been set,
the LED light indicates
the set time of operation.
Timer / Air Quality Light Button
Press to cycle through and set
desired length of operation
(1hr, 4hr, 8hr, [NO TIMER]).
Press and hold for 3 seconds
to enable or disable the
Air Quality light.
Smart Sensor
Automatically
detects indoor
air quality.
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Power Button
Turns the unit on
or off.
Child Lock Indicator
LED light indicates whether
Child Lock mode is
enabled or disabled.
Check Filter Indicator
LED light indicates when it is
time to change the filter.
PlasmaWave
Indicator
Indicates whether
PlasmaWave
®
is
enabled or disabled.
PlasmaWave Button
Enables or disables
PlasmaWave
®
.