Winegard RC-1010, Installation Manual

Page: 13 / 36

13
Viewing the Remote Control
Battery Installation
Use two AAA batteries (supplied)
Remove the battery cover by pushing the tab while lifting the cover up. Match the + and - ends of the
batteries with the correct marks on the remote control. Replace the battery cover.
Note: Incorrect installation can cause battery leakage and corrosion that will damage the Remote Control.
Precautions
Replace batteries in pairs. Do not mix battery types (such as zinc carbon with alkaline). Do not recharge,
heat, short circuit, disassemble, or burn batteries.
Remote Control Unit
Button Description
Power Press to turn ON and OFF
Numeric Buttons Press to enter channel number or password
MUTE Press to turn off the audio output
CC/CS
Press to call up the Closed Caption (CC) and Caption
Service (CS) list. You can select one to see Closed
Caption.
INFO
Press to display I-Plate providing information about the
current channel, press twice could see the program
extend information
PAGE Select EPG channel page
AUDIO Press to select multi-lingual.
MENU Press to activate or close the On-Screen Menu
EXIT Press to back to the previous menu page
EPG Press to display the Electronic Program Guide
FAV Press to display the “Favorite” program list.
ENTER
Press to select the highlighted menus or sub-menu
items
－ － － －
For digital channel number, like “10-02”.
CH+
▲
/CH-
▼
Press to move cursor up, down or make channel up
and down functions.
VOL+
►
/VOL-
◄
Press to move cursor right, left or increase or decrease
audio volume.
A. RATIO
Press to adjust the aspects ratio between 16:9 and 4:3
and changes zoom and letterbox modes.
RTN Press to return to the previous channel you viewed.