17
Setting Up the RC-1010 RECEIVER
1.
Make sure the physical connection is properly connected.
2.
Turn on the TV.
3.
Select the appropriate external video input on your TV by using the TV remote control.
4.
Make sure the receiver is already in power-on mode. If it is in off mode (i.e. front panel LED screen
shows ----), turn on the receiver by pressing the “POWER” button on the front panel of the receiver
or on the remote control.
Press the “MENU” button to see the Menu banner.
Channel
Before you use any of the channel buttons (CH
▲▼
, FAV.), the available channels must first be scanned
and memorized.
Initial Screen
–
● The first time the receiver is powered up,
you see
the message “
Press (Menu) key and then
select Channel to run Auto/Manual Scan
”.
Press the MENU button to
display the MENU
banner.
● Use the arrow keys
◄
or
►
to move the highlight
through the menus and view the menu items.
● Press the “EXIT” button to return to the previous
menu or press the “MENU” button to exit the
menu system.
Summary of Contents for RC-1010
Page 34: ...34 APENDIX 4 Technical Specifications ...
Page 36: ...36 ...
