Winegard RC-1010, Installation Manual

Page: 10 / 36

10
Connecting to an RV Antenna
Hookup through 12V
powered video switch
(RV only)
1. Connect Coax From Antenna
to “Antenna Input” on Video Switch
2. Connect Coax From “Out to Tv 1” on
Video Switch to “Input” on Splitter
3. Connect Coax From “Output 1”
on Splitter to “Antenna In” on TV
4. Connect Coax From “Output 2”
on Splitter to “RF In” on
Digital Receiver.
5. Refer to pages 11 and 12 for
connecting Digital Receiver to Television.
Note: If you have a Satellite Receiver,
VCR, etc. connected to your video
switch, you must tune your tv to the
proper channel (ie. channel 3 or 4) to
watch your component.
Hookup through
wall plate power supply
1. Connect Coax From Antenna
to “Antenna Input” on Power Supply
2. Connect Coax From “Out to Tv ” on
Power Supply to “RF IN” on Digital
Receiver
3. Connect Digital Receiver to Television
using desired connection. See pages
11 and 12.
Note: If your Antenna is already
connected directly to your television,
simply disconnect “Antenna In” coax
on the back of your television and
connect it to “RF IN” on the back of
digital receiver. Connect Digital Receiver
to Television using desired connection..