Wine Guardian D025, Installation, Operation And Maintenance Manual

Page: 78 / 96

72
Inspection and Start-up Checklists
检查和启动检查清单
Receiving and Inspecting
接收和检查

Unit received undamaged
完整无损地器材单元接受

Unit received complete as ordered including accessories
收到完整的器材包括附件
Handling and Installing
搬运和安装

Unit mounted on solid level surface
装置安装在坚实平坦的表面

Sufficient space allowed for access to unit and accessories Proper electrical service
provided
设备周围有足够的空间，电力供应正确

Hot water provided to humidifier
加湿机热水供应

Drain lines and trap installed properly
排水管线和安装正确的陷阱

Ductwork, fittings and grilles installed properly
管道，配件及格栅正确安装

All cold duct surfaces insulated
所有冷风管道表面绝缘

Low ambient control included if freezing condition present No obstructions to air flow to condenser
低温环境控制考虑到冰冻状态，冷凝器空气 流动没有障碍物干扰。
Starting-up the Unit
启动主机

General visual inspection looks good All wiring connections checked
一般目视检查过关 所
有线路连接检查过关

All ducts, grilles and panels in place
通风管道，格栅和盖板全部到位道。

Start unit
启动主机

Check ducts and connections for air leaks
检查管道和连接处空气泄漏

Balance air distribution
平衡空气分布

Confirm condenser airflow is unrestricted
确认冷凝器气流不受限制

Verify cooling and heating operation
检查冷却和加热操作

Check for excessive noise or vibration
检查噪音或震动过大