Windsor CV24 Operating Instructions Manual Download Page 43

Page: 43 / 141

Maintenance

Lever access

Turn wheel to left and reach up under bumper and steel
brake.

Drive gear engaged

Machine can be driven.

Rotate lever firmly in direction of arrow

Drive gear disengaged

Machine can be pushed or towed (slowly).

When disengaged the machine rolls easily. Disengage
on a level surface.

Rotate lever firmly in direction of arrow.

Inclines

When navigating an incline the machine may come to a
stop. Turn the machine off. Wait 5 minutes and start the
machine and proceed up the incline.

Overheating may occur if you do not wait the full 5
minutes.

Une surchauffe peut se produire si vous n'attendez
pas les 5 minutes complètes.

86398780 Operator Manual iVac 24 ATV

Summary of Contents for CV24














































































































































Search results

Summary of Contents for CV24

Reviews:

Related manuals for CV24

Brands by name

Popular brands

Windsor CV24, Operating Instructions Manual

Search results

Summary of Contents for CV24

Reviews:

Related manuals for CV24

Brands by name

Popular brands