Windsor CV24 Operating Instructions Manual Download Page 44 | Manualshive

Page: 44 / 141

background image

44

Maintenance

Preparation for Loading/Unloading Trailer

Before loading or unloading machine from trailer, brush deck must be in the up position.

When transporting the machine on a trailer or in a truck, in addition to using tie-downs, be sure to block the tires to
prevent the machine from rolling.

Machine Tie-Downs

There are two tie points located in front of the rear wheels on the frame, and a Tie-down wrap point on the vacuum
bag housing. Tie-down devices must be of the proper type and strength. The combined strength of all tie-downs
must be strong enough to lift two times the weight of the machine. Tie-downs must be positioned to prevent the
machine from moving forward, backward, or either side to side. Use all four corners of the machine with the tie-
downs running out opposite directions. Tie-downs must be attached to the transporting vehicle securely.

CONNECT

AT

FRAME

VIEW FROM

BOTTOM

Recommended Tie-Down Points

VACUUM

BAG HOUSING

86398780 Operator Manual iVac 24 ATV

«
...
42
43
44
45
46
...
»

Summary of Contents for CV24














































































































































Reviews:

No comments

Related manuals for CV24

Brand: Pioneer Eclipse Pages: 51

Brand: EuroLite Pages: 38

Brand: Malanbao Pages: 6

Brand: Canon Pages: 224

Thermal Binding Machine 8.2

Brand: Peleman Pages: 2

Brand: Brother Pages: 30

Brand: Brother Pages: 3

Brand: Brother Pages: 47

Laura Ashley Innov-is NX800

Brand: Brother Pages: 16

Brand: Brother Pages: 46

Brand: Brother Pages: 48

KE100 Motor Drive

Brand: Brother Pages: 21

Brand: Brother Pages: 30

Brand: Brother Pages: 56

Brand: Brother Pages: 84

LK3-B430E MARK II

Brand: Brother Pages: 99

Brand: Brother Pages: 24

Brand: Brother Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands