Windsor 1.005-294.0, Operating Instructions Manual, Page: 28 / 53

28
Operation
Application on different Floor Types
Carpet Cleaning
Vacuum the carpet thoroughly before cleaning. Large dirt particles are removed, allowing the application to be
more effective.
Depending on the level of soil and the nature of the carpet, select a suitable textile cleaning pad. Absorbent pads
are suitable for all types of carpets, while Carpet pads are suitable in particular for the cleaning of heavily soiled
commercial carpets.
Attach a Absorbent pad on the driver plate by laying the pad on the floor and centering the machine base over the
pad.
For gentle cleaning on sensitive long-fiber carpets and for easy handling on rough carpets, use the Gliders.
Each section of the carpet should be moistened first by using the spray button when you move forward. The carpet
should be cleaned by going forward and backwards two to three times, while only spraying on the first pass in order
to keep the drying time low. Depending on the level of soil and the nature of the carpet, this process can be
shortened or extended.
As required, carpets can be vacuumed again after cleaning.
Cleaning Hard Floors
Remove dust and coarse dirt from the surface before cleaning
Choose a suitable pad according to the application.
Place the driver plate on the pad by putting the pad on the floor and centering the machine base over it.
Each section of the surface should be cleaned by moving two to three times forward and backwards and adding
water and cleaning solution as needed. Depending on the soil contamination and the floor type this process can be
shortened or extended.
86375030 Manual